R1with fresh green: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(BLO)36 sc(36)
R8–1336 sc(36)
R142 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R1530 sc(30)
Size before assembly: about 5 cm at the widest, 4.5 cm long; 15 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(22)
R4–622 sc(22)
Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With fresh green: ch 5.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R42 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(26)
R526 sc(26)
A flat oval about 4.5 × 3.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running vertically, top to bottom. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With cream: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with cream: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R5–610 sc(10)
Size before assembly: about 1.3 cm at the widest, 1.9 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 30° around round 4. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 4, 3 st from the centre front line, upward ). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

Of these: front — 1; side — 1; back — 1. Flat motif — star (worked in rounds, one layer of fabric), about 2.6 × 2.8 cm; 2 rows.
Round 1: with star gold: into a magic ring; 10 sc; sl st in the first st to join (10) Round 2: (point (ch 3, then back along the chain from the 2nd ch from hook: 1 sc, 1 hdc), skip 1 st, 1 sl st) ×5 (15)
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with fresh green: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–49 sc(9)
R57 sc, dec(8)
Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R3(5 sc, inc) ×2(14)
R4–514 sc(14)
R6(1 sc, dec, 1 sc, dec, 1 sc) ×2(10)
Size before assembly: about 1.8 cm at the widest, 1.8 cm long; 6 rounds.
Change to fresh green (pull it through on the last yarn-over of R3).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

Row 1with sea green: into a magic ring; 3 sc(3)
Row 2ch 1 and turn (not counted as a st); inc ×3(6)
Row 3ch 1 and turn (not counted as a st); (1 sc, inc) ×3(9)
Row 4ch 1 and turn (not counted as a st); (1 sc, inc, 1 sc) ×3(12)
Row 5ch 1 and turn (not counted as a st); (3 sc, inc) ×3(15)
Row 6ch 1 and turn (not counted as a st); (2 sc, inc, 2 sc) ×3(18)
Row 7ch 1 and turn (not counted as a st); along the curved edge only (not along the straight edge); (2 sl st, point (ch 4, then back along the chain from the 2nd ch from hook: 1 sc, 1 hdc, 1 dc), skip 1 st, 3 sl st) ×3(24)
Flat motif — half circle (worked in turned rows, one layer of fabric), about 3.5 × 6 cm; 7 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with fresh green: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R5(4 sc, inc) ×2(12)
R63 sc, inc, 5 sc, inc, 2 sc(14)
R7–1014 sc(14)
Size before assembly: about 1.9 cm at the widest, 3.4 cm long; 10 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 6. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 2.5 st from the centre front line, upward ). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

R1with blush pink: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with sea green: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R48 sc(8)
Size before assembly: about 1.1 cm at the widest, 1.2 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 5 mm thick.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 14 mm (on the head): in round 17, 10 st apart (count along round 17: about 5 st each side of the centre front line).
Embroidery in dark green thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 1 and 2, 1 st from the centre top line, toward the toy's left ) → (in round 2, 2 st from the centre top line, toward the toy's left ).
Embroidery in dark green thread (on the snout), straight stitches through: (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's left ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's right ) → (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's right ).

Chibi Dragon Wizard

What you'll need

Gauge

Worked in

Parts

Abbreviations

Little Angel Ornament

Present with a Face Ornament

Jingle Bell Ornament

Cute Krampus

Chibi Dragon Wizard

What you'll need

Gauge

Worked in

Parts

Body15 rnds−

Head28 rnds+

Snout6 rnds+

Belly patch5 rnds+

Horn6 rnds+

Wizard hat24 rnds+

Star0 rnds+

Arm5 rnds+

Foot6 rnds+

Wing7 rnds+

Tail10 rnds+

Cheek2 rnds+

Spike4 rnds+

Assembly16+

Face+

Abbreviations

More like this

Little Angel Ornament

Present with a Face Ornament

Jingle Bell Ornament

Cute Krampus