R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R10–1554 sc(54)
R164 sc, (dec, 7 sc) ×5, dec, 3 sc(48)
R17–1948 sc(48)
R203 sc, (dec, 6 sc) ×5, dec, 3 sc(42)
R2142 sc(42)
Size before assembly: about 7.5 cm at the widest, 6.3 cm long; 21 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(22)
R4–622 sc(22)
Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With cream: ch 5.
Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with inner: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R4dec ×6(6)
Size before assembly: about 2.5 cm at the widest, 1.2 cm long; 4 rounds.
Change to cream (pull it through on the last yarn-over of R1).
→ This piece is not stuffed.
Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.1 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 25 mm across.

R1with scarf red: ch 48 and join into a ring with a sl st in the first ch (do not twist); 48 sc, one in each ch of the ring(48)
R2(ribbing)(fpdc, bpdc) ×24(48)
R3(ribbing)(fpdc, bpdc) ×24(48)
Size before assembly: about 6.2 cm at the widest, 1.8 cm long; 3 rounds.
Change to scarf green (pull it through on the last yarn-over of R1).
Change to scarf red (pull it through on the last yarn-over of R2).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R210 sc(10)
R3–410 sc(10)
R5–610 sc(10)
R7–910 sc(10)
Size before assembly: an oval about 1.7 × 0.5 cm at the widest, 3.2 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With scarf green: ch 5.
Change to scarf red (pull it through on the last yarn-over of R2).
Change to scarf green (pull it through on the last yarn-over of R4).
Change to scarf red (pull it through on the last yarn-over of R6).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together. Bend ≈ 75° around round 6. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R3(3 sc, inc) ×3(15)
R4–615 sc(15)
R7(3 sc, dec) ×3(12)
R8–1012 sc(12)
R11(4 sc, dec) ×2(10)
Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5–824 sc(24)
R9(6 sc, dec) ×3(21)
R103 sc, (dec, 5 sc) ×2, dec, 2 sc(18)
R1118 sc(18)
Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R42 sc, dec, 4 sc, dec, 2 sc(10)
Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 10 mm (on the head): in round 14, 8 st apart (count along round 14: about 3.8 st each side of the centre front line).
Safety nose, triangle, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose #1f1c1c.
Embroidery in nose thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (between rounds 2 and 3, on the centre bottom line ).
Embroidery in nose thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 3 st from the centre bottom line, toward the toy's left ).
Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 17, 6.5 st from the centre front line, toward the toy's left . Colour blush.

Polar Bear in a Scarf

What you'll need

Gauge

Worked in

Parts

Body · R1–R5

Waving Scarf Frog

Lamb in a Christmas Sweater

Bear in a Gift Box

Frog in an Elf Hat Ornament

Abbreviations

Polar Bear in a Scarf

What you'll need

Gauge

Worked in

Parts

Body21 rnds−

Head26 rnds+

Muzzle6 rnds+

Ear4 rnds+

Scarf3 rnds+

Scarf end9 rnds+

Arm11 rnds+

Leg11 rnds+

Tail4 rnds+

Assembly9+

Face+

Body · R1–R5

More like this

Waving Scarf Frog

Lamb in a Christmas Sweater

Bear in a Gift Box

Frog in an Elf Hat Ornament

Abbreviations