R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3[cream] 1 sc [brown] (inc, 1 sc) ×5 [cream] inc(18)
R4[cream] 2 sc [brown] 1 sc in same st, 2 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc [cream] inc, 1 sc(24)
R5[cream] 3 sc [brown] inc, 3 sc, inc, 3 sc, inc, 3 sc, inc, 3 sc, inc, 1 sc [cream] 2 sc, inc(30)
R6[cream] 2 sc, inc, 1 sc [brown] 3 sc, inc, 4 sc, inc, 4 sc, inc, 4 sc, inc, 2 sc [cream] 2 sc, inc, 2 sc(36)
R7[cream] 6 sc [brown] 1 sc in same st, 5 sc, inc, 5 sc, inc, 5 sc, inc, 5 sc, inc [cream] 5 sc, inc(42)
R8[cream] 3 sc, inc, 2 sc [brown] 4 sc, inc, 6 sc, inc, 6 sc, inc, 6 sc, inc, 3 sc [cream] 3 sc, inc, 3 sc(48)
R9–127 sc in cream, 32 sc in brown, 9 sc in cream(48)
R136 sc in cream, 33 sc in brown, 9 sc in cream(48)
R14[cream] 5 sc [brown] 2 sc, dec, 14 sc, dec, 14 sc [cream] dec, 7 sc(45)
R154 sc in cream, 34 sc in brown, 7 sc in cream(45)
R16[cream] 3 sc [brown] 4 sc, dec, 13 sc, dec, 13 sc, dec [cream] 6 sc(42)
R172 sc in cream, 35 sc in brown, 5 sc in cream(42)
Size before assembly: about 6.7 cm at the widest, 4.9 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R4–520 sc(20)
Size before assembly: an oval about 3 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With cream: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with brown: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3(2 sc, inc) ×3(12)
R4[cream] 1 sc [brown] 1 sc, inc, 3 sc, inc, 4 sc [cream] 1 sc in same st, 1 sc(15)
R5[cream] 2 sc [brown] 2 sc, inc, 4 sc, inc, 3 sc [cream] 1 sc, inc(18)
R6–92 sc in cream, 13 sc in brown, 3 sc in cream(18)
R10[cream] 1 sc [brown] 1 sc, dec, 4 sc, dec, 4 sc [cream] dec, 2 sc(15)
R11[brown] 3 sc, dec, 3 sc, dec, 2 sc [cream] 1 sc, dec(12)
Size before assembly: about 3 cm at the widest, 3.6 cm long; 11 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(3 sc, inc) ×3(15)
R4–615 sc(15)
R7(3 sc, dec) ×3(12)
R8–1012 sc(12)
R11(4 sc, dec) ×2(10)
Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5–824 sc(24)
R9(6 sc, dec) ×3(21)
R103 sc, (dec, 5 sc) ×2, dec, 2 sc(18)
R1118 sc(18)
Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with chocolate: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
A flat circle about 2.3 cm across; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R42 sc, dec, 4 sc, dec, 2 sc(10)
Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with tan: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–109 sc(9)
R117 sc, dec(8)
R123 sc, dec, 3 sc(7)
Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 25° around round 6. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 6, on the centre front line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together. Bend the second piece as a mirror image.

R1with tan: 5 sc in MR(5)
R21 sc, inc, 1 sc, inc, 1 sc(7)
R3–77 sc(7)
Of these: no. 1 — 2 (left and right); low — 2 (left and right). Size before assembly: about 0.9 cm at the widest, 2.4 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with red: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
R4dec ×5(5)
Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 4 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

R1with red: ch 46 and join into a ring with a sl st in the first ch (do not twist); 46 sc, one in each ch of the ring(46)
R2(ribbing)(fpdc, bpdc) ×23(46)
R3(ribbing)(fpdc, bpdc) ×23(46)
Size before assembly: about 5.9 cm at the widest, 1.8 cm long; 3 rounds.
Change to white (pull it through on the last yarn-over of R1).
Change to red (pull it through on the last yarn-over of R2).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R210 sc(10)
R3–410 sc(10)
R5–610 sc(10)
R7–910 sc(10)
Size before assembly: an oval about 1.7 × 0.5 cm at the widest, 3.2 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With white: ch 5.
Change to red (pull it through on the last yarn-over of R2).
Change to white (pull it through on the last yarn-over of R4).
Change to red (pull it through on the last yarn-over of R6).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together. Bend ≈ 75° around round 6. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 10–12 mm (on the head): in round 15, 9 st apart (count along round 15: about 4.3 st each side of the centre front line).
Embroidery in chocolate thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line) → (in round 3, on the centre bottom line ).
Embroidery in chocolate thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 18, 7.5 st from the centre front line, toward the toy's left . Colour blush.

Baby Reindeer

What you'll need

Gauge

Worked in

Parts

Abbreviations

Waving Scarf Frog

Lamb in a Christmas Sweater

Bear in a Gift Box

Frog in an Elf Hat Ornament

Baby Reindeer

What you'll need

Gauge

Worked in

Parts

Body17 rnds−

Head28 rnds+

Muzzle5 rnds+

Ear11 rnds+

Arm11 rnds+

Leg11 rnds+

Hoof3 rnds+

Tail4 rnds+

Antler12 rnds+

Antler tine7 rnds+

Red nose ball4 rnds+

Scarf3 rnds+

Scarf end9 rnds+

Assembly14+

Face+

Abbreviations

More like this

Waving Scarf Frog

Lamb in a Christmas Sweater

Bear in a Gift Box

Frog in an Elf Hat Ornament